Yamaha XT1200Z(Z) 2010 Service Manual page 474

5. Check the entire signaling system
wiring.
Refer to "CIRCUIT DIAGRAM" on
page 8-21.
OK ↓
Replace the meter assembly.
The neutral indicator light fails to come on.
1. Check the neutral switch.
Refer to "CHECKING THE
SWITCHES" on page 8-137.
OK ↓
2. Check the relay unit (diode).
Refer to "CHECKING THE RELAY
UNIT (DIODE)" on page 8-147.
OK ↓
3. Check the entire signaling system
wiring.
Refer to "CIRCUIT DIAGRAM" on
page 8-21.
OK ↓
Replace the meter assembly.
The oil level warning light fails to come on.
1. Check the oil level switch.
Refer to "CHECKING THE
SWITCHES" on page 8-137.
OK ↓
2. Check the entire signaling system
wiring.
Refer to "CIRCUIT DIAGRAM" on
page 8-21.
OK ↓
Replace the meter assembly.
The fuel meter, fuel level warning light, or both fail to come on.
1. Check the fuel sender.
Refer to "CHECKING THE FUEL
SENDER" on page 8-151.
OK ↓
NG →
Properly connect or repair the signaling
system wiring.
NG →
Replace the neutral switch.
NG →
Replace the relay unit.
NG →
Properly connect or repair the signaling
system wiring.
NG →
Replace the oil level switch.
NG →
Properly connect or repair the signaling
system wiring.
NG →
Replace the fuel pump assembly.
8-25
SIGNALING SYSTEM