Yamaha XT1200Z(Z) 2010 Service Manual page 460

9. Check the engine stop switch.
Refer to "CHECKING THE
SWITCHES" on page 8-137.
OK ↓
10.Check the neutral switch.
Refer to "CHECKING THE
SWITCHES" on page 8-137.
OK ↓
11.Check the sidestand switch.
Refer to "CHECKING THE
SWITCHES" on page 8-137.
OK ↓
12.Check the clutch switch.
Refer to "CHECKING THE
SWITCHES" on page 8-137.
OK ↓
13.Check the start switch.
Refer to "CHECKING THE
SWITCHES" on page 8-137.
OK ↓
14.Check the entire starting system
wiring.
Refer to "CIRCUIT DIAGRAM" on
page 8-7.
OK ↓
The starting system circuit is OK.
ELECTRIC STARTING SYSTEM
NG →
The engine stop switch is faulty. Replace
the right handlebar switch.
NG →
Replace the neutral switch.
NG →
Replace the sidestand switch.
NG →
Replace the clutch switch.
NG →
The start switch is faulty. Replace the right
handlebar switch.
NG →
Properly connect or repair the starting sys-
tem wiring.
8-11