Instrument Functions - Yamaha XT1200Z(Z) 2010 Service Manual

EAS23P1106

INSTRUMENT FUNCTIONS

Multi-function meter unit
EWA23P1041
WARNING
Be sure to stop the vehicle before making
any setting changes to the multi-function
meter unit. Changing settings while riding
can distract the operator and increase the
risk of an accident.
1
11
1. Tachometer
2. Traction control system mode display
3. Coolant temperature display/air intake
temperature display/instantaneous fuel
consumption display/average fuel consumption
display
4. Speedometer
5. Fuel meter
6. Drive mode display
7. Clock
8. Right set button
9. Left set button
10. Odometer/tripmeter/fuel reserve tripmeter
11. Traction control system switch
The multi-function meter unit is equipped with
the following:
• a speedometer
• a tachometer
• an odometer
• two tripmeters (which show the distance trav-
eled since they were last set to zero)
• a fuel reserve tripmeter (which shows the dis-
tance traveled since the last segment of the
fuel meter started flashing)
• a clock
• a fuel meter
• an air intake temperature display
• a coolant temperature display
• a fuel consumption display (instantaneous and
average consumption functions)
• a drive mode display (which shows the select-
ed drive mode)
2 3 4 5
10 9 8 7 6
• a traction control system mode display (which
shows the selected traction control system
mode)
• a self-diagnosis device
• an LCD and tachometer brightness control
mode
The left and right set buttons, located under the
display, allow you to control or change the set-
tings in the multi-function meter unit.
TIP
• To use the left and right buttons, the key must
be turned to "ON", except for the brightness
mode.
• For the U.K. only: To switch the speedometer
and odometer/tripmeter/fuel consumption dis-
plays between kilometers and miles, press the
left button for at least two seconds.
Tachometer
1
1. Tachometer
2. Tachometer red zone
The electric tachometer allows the rider to mon-
itor the engine speed and keep it within the ideal
power range.
When the key is turned to "ON", the tachometer
needle sweeps once across the r/min range and
then returns to zero r/min in order to test the
electrical circuit.
ECA23P1086
NOTICE
Do not operate the engine in the tachometer
red zone.
Red zone: 7750 r/min and above
1-31
FEATURES
2