Configuring Call Settings - Polycom V500 System Administrator's Manual

Configuring Call Settings

The Call Settings screens provide access to high-level options for the entire
system. For convenience, some of the User Settings options are repeated on
these screens.
To configure call settings:
1. Go to System > Admin Settings > General Settings > System Settings >
Call Settings.
2. Configure these settings:
Setting Description
Maximum Time in Enter the maximum number of minutes allowed for call
Call length.
When that time has expired, you see a message asking you
if you want to hang up or stay in the call. If you do not answer
within one minute, the call automatically disconnects. If you
choose to stay in the call at this time, you will not be
prompted again.
Choosing 0 removes any limit.
Auto-Answer Specifies whether to answer incoming point-to-point calls
Point to Point automatically.
Display Time in Specifies whether to display the elapsed time or the local
Call time during a call. You can also choose not to display the
time.
Call Detail Report Specifies whether to generate a report of all calls made with
the system. When selected, details for all calls can be
viewed via the V500 web interface and downloaded as a
.csv file.
Recent Calls Specifies whether to display the Recent Calls button on the
home screen. The Recent Calls screen lists the site number
or name, the date and time, and whether the call was
incoming or outgoing.
Note: If the Call Detail Report option is not selected, the
Recent Calls option is not available.
Far Site Name Turns the far site name display on or off, or specifies the
Display Time time period the far-site name appears on screen when calls
first connect.
Customizing the V500 System
4 - 13