Polycom V500 System Administrator's Manual page 53

Admin Settings
General Settings Network
System Settings
Home Screen Settings
Security
Location
Options
IP
ISDN*
Call Preference
Recent Calls
To set or change the Admin Password:
1. Go to System > Admin Settings > General Settings > Security.
2. Enter or change the password.
The default administrator password is the 14-digit system serial number.
To reset a forgotten Admin Password:
1. Get the system's serial number from the system or from the System
Information screen.
2. Go to System >Diagnostics > Reset System.
3. Enter the system's serial number and select Delete System Settings.
4. Select Reset System.
When the system completes the reset, it leads you through the setup wizard.
You can enter a new Admin Password when you set up the system.
Screens that Require the Admin Password for Access
Only screens within Admin Settings require the administrator's password.
Diagnostics System Information
Monitor Camera
H.323 Settings
SIP Settings
Quality of Service
Firewall
Password Protected
Utilities
General Access
Audio LAN Properties
* May not be present for all system types
Customizing the V500 System
User Settings
Global Services
Directory Servers
Dialing Rules
SNMP
Management Servers
Account Validation
My Information
4 - 9