Setting Up Your System Hardware - Polycom V500 System Administrator's Manual

Setting Up Your System Hardware

V500 System Back Panel View
S-video output from system
For monitor video (preferred
over Composite video output)
BRI port
For ISDN calls
(not present on
IP-only systems)
Composite video output
from system
For monitor video (if S-video
output is not used)
This chapter provides information to supplement the setup sheet provided
with your system and its optional components. A printed copy of the system
setup sheet is provided with each V500 system. PDF versions of the system
setup sheets are available at www.polycom.com/videodocumentation.
This illustration identifies the system's back panel connectors.
BRI
Headphone jack
For optional headphone
Audio output from
system
For monitor audio
Power connector
For power supply
Power switch
DC IN 12V
LAN
LAN port
For IP calls, the V500 web
interface, or remote
management
2
2 - 1