Configuring Camera Settings; Configuring The Monitor - Polycom V500 System Administrator's Manual

Administrator's Guide for the V500 System

Configuring Camera Settings

Configuring the Monitor

4 - 2
The Camera screen lets you specify camera settings.
To configure camera settings:
1. Go to System > Admin Settings > Camera.
2. Configure these settings:
Setting Description
Backlight Specifies whether to have the camera automatically adjust
Compensation for a light background. Backlight compensation is best used
in situations where the subject appears darker than the
background.
Camera Specifies how much light is let into the camera's iris. A low
Brightness number allows in less light; a high number allows in more
light.
Power Synchronizes the screen display with the local electrical
Frequency power frequency in order to eliminate video flicker. Typically,
the default setting is correct for your system and location.
However, if your system experiences video flicker, you may
want to change the setting:
•
•
The V500 system allows you to customize the display to suit your room and
equipment configuration.
To configure the monitor:
1. Go to System > Admin Settings > Monitor.
60 Hz — Select this if the power frequency in your
location is 60 Hz and you have a PAL system.
50 Hz — Select this if the power frequency in your
location is 50 Hz and you have an NTSC system.