Polycom V500 System Administrator's Manual page 48

Administrator's Guide for the V500 System
Using Dual Monitor Emulation
4 - 4
Dual Monitor Emulation is designed for rooms or offices with one monitor only. Users see
both near and far sites on one monitor in two different views. During presentations, users
see content and the near and far sites. What you see during a call can depend on factors
such as the number of sites in the call, and whether content is being shared.
Setting Up
Using the monitor controls, select the full-screen setting that stretches the picture
uniformly, without clipping. On the V500 system Monitor screen:
1. If you are using a wide-screen monitor, set Monitor to 16:9.
Otherwise, set Monitor to 4:3.
2. Select Dual Monitor Emulation.
Using in a Call
The following are examples of Dual
Monitor Emulation.
Near and far site are the same size and
appear side by side.
Near site presses PIP
Size of far site window increases.
Near site presents to far site
Content, near site, and far site are displayed
with Dual Monitor Emulation.
Far site
Call connects
Near site