Getting Started With Calling - Polycom V500 System Administrator's Manual

Getting Started with Calling

5. In the Closed Caption screen, type the caption text into the text field. Text
wraps to the next line after 59 characters.
6. Press Enter to send the text to the sites in the conference.
Providing Captions Via a Telnet Session
Closed captioners can provide captions from inside the conference room, or
from a remote location, by entering captions via a Telnet session, as shown in
the following diagram.
Telnet session
To supply closed captions for a conference using a Telnet session:
1. On a PC, open a command line interface.
2. Start a Telnet session using the V500 system IP address and port 24 (for
example,
telnet 10.11.12.13
3. Enter the command
4. Press Enter to send the text.
5. To stop sending closed captions, press Ctrl-Z.
The system is installed and you've finished the network configuration and
designed the behaviors. Now it's time for you to start placing calls. You may
want to spend time becoming familiar with basic calling tasks.
The following resources are available:
Getting Started Guide for the V500 System— This guide is for all users, from
•
beginners to the more experienced. It covers meeting basics, different
ways to place calls, how to use the remote control, and how to deliver
presentations.
It is included on the V500 system documentation CD and is also available
on the web. Print out copies to hand out in training classes, post it on your
Intranet, or email it to everyone in your organization who meets via video.
LAN
).
to start captioning.
cc
Customizing the V500 System
V500 System
LAN
port
4 - 25