Configuring Call Settings - Polycom VSX Series Administrator's Manual

Administrator's Guide for the VSX Series

Configuring Call Settings

4 - 38
The Call Settings screens provide access to high-level options for the entire
system. For convenience, some of the User Settings options are repeated on
these screens.
To configure call settings:
1. Go to System > Admin Settings > General Settings > System Settings >
Call Settings.
2. Configure these settings:
Setting Description
Allow Mixed IP Specifies whether users can make multipoint calls that
and ISDN Calls include both IP and H.320 sites.
VSX 3000 Clearing this option provides extra security for systems
VSX 3000A requiring LAN connectivity while placing encrypted calls over
VSX 5000 ISDN lines. If you clear this selection, IP endpoints cannot
VSX 7000 join ISDN calls.
VSX 7000s
VSX 7000e
VSX 8000
Maximum Time in Enter the maximum number of minutes allowed for call
Call length.
When that time has expired, you see a message asking you
if you want to hang up or stay in the call. If you do not answer
within one minute, the call automatically disconnects. If you
choose to stay in the call at this time, you will not be
prompted again.
Choosing 0 removes any limit.
Auto-Answer Specifies whether to answer incoming point-to-point calls
Point to Point automatically.
Auto-Answer Specifies whether to answer incoming multipoint calls
Multipoint automatically.
VSX 3000
VSX 3000A
VSX 7000
VSX 7000s
VSX 7000e
VSX 8000