Configuring For Snmp Management - Polycom V500 System Administrator's Manual

Administrator's Guide for the V500 System

Configuring for SNMP Management

5 - 10
To configure the V500 system for SNMP management:
1. Access the SNMP configuration screen either in the V500 web interface or
on the V500 system:
— In the V500 web interface, go to System Setup > Admin Settings >
Global Services > SNMP.
— On the V500 system, go to System > Admin Settings > Global
Services > SNMP.
2. Configure these settings:
Setting
Enable SNMP
Community
Contact Name
Location Name
System Description
Console IP
Address
Description
Allows administrators to manage the system remotely
using SNMP.
Specifies the SNMP management community in which you
want to enable this system. The default community is
public.
Specifies the name of the person responsible for remote
management of this system.
Specifies the location of the system.
Specifies the type of video conferencing device.
Specifies the IP address of the computer you intend to use
as your network management station and to which SNMP
traps will be sent.