System Components - Avaya IP Office Essential Edition Installation Manual

1.1 System Components

The following are typical components of an IP Office Essential Edition - PARTNER® Version system.
PARTNER Version Installation Manual
IP Office Essential Edition
IP Office IP500 V2 Control Unit
·
The control unit holds the main configuration and performs the
routing and switching for telephone calls and data traffic. The
control unit includes 4 slots for optional base cards to support
trunk and phone extension ports.
Avaya System SD Card
·
This card is used to hold system files and provide voicemail.
The card has a unique serial number which is is used to
validate license keys entered into the system's configuration.
The card is mandatory for correct system operation.
· Power Cord
The control unit is not supplied with a power cord. An
IEC60320 C13 type earthed power cord is required.
IP500 Base Cards
·
The IP500 control unit has slots for up to 4 IP500 base cards.
These can be used to add analog, ETR and digital phone extension
ports.
IP500 Digital Station 8 Base Card
·
Each card supports up to 8 1400 series phones.
IP500 Analog Phone 2/Phone 8 Base Cards
·
Each card supports 2 or 8 analog phones.
IP500 ETR6 Base Card
·
Each card supports up to 6 ETR phones (only 2 ETR34 or
ETR34D phones).
IP500 Trunk Daughter Cards
·
The IP500 base cards can be fitted with an IP500 trunk daughter
card in order to support trunk connections.
IP500 Analog Trunk Card
·
This card provides 4 analog trunk connections.
IP500 PRI Trunk Card
·
This card provides a single PRI/T1 trunk connection.
IP500 ATM Combination Cards
·
This card is a pre-paired base and daughter card. It provides 6
digital station ports, 2 analog phone ports, 10 VCM channels and 4
analog trunk ports. The trunk daughter card cannot be removed or
replaced with another type.
· VCM channels are required for support of SIP trunks. This is
the only type of card that provides VCM channels for IP Office
Essential Edition - PARTNER® Version.
IP500 External Expansion Module
·
One external expansion module can be added.
IP500 Phone 16 Expansion Module
·
This type of external module adds support for 16 additional
analog phone extensions.
IP500 Digital Station 16 Expansion Module
·
This type of external module adds support for 16 additional
ports for 1400 Series phones.
· Power Cord
The external expansion modules include an external power supply
unit but do not include a mains power cord. An IEC60320 C13 type
earthed power cord is required.
Cables
·
The IP Office is designed primarily for connection to a structured
cabling system using CAT3 UTP cabling. This approach allows
telephone and data traffic to share the same wiring infrastructure
and simplifies equipment moves.
(Maximum 3)
(Maximum 4)
(Maximum 3)
(Maximum 4)
(Maximum 1)
(Maximum 2)
- Issue 1c (09 April 2010)
Page 8