Rack Space Requirements - Avaya IP Office Essential Edition Installation Manual

2.2.4 Rack Space Requirements

All IP Office control units and external expansion modules can be rack mounted into standard 19" rack systems. Each unit
requires a 2U slot space within the rack. Rack mounting requires an IP500 rack mounting kit for each control unit and
external expansion module.
Where IP Office systems are being rack mounted, the effect of conditions within the rack cabinet must be considered. For
example the rack temperature may be above the room temperature and airflow within the rack will be restricted. The
environmental requirements
IP500 Rack Mounting Kit
Barrier Box Rack Mounting Kit
PARTNER Version Installation Manual
IP Office Essential Edition
for the individual IP Office units are still applicable inside the rack cabinet.
· IP500 Rack Mounting Kit (SAP 700429202)
This kit contains all the components required for the rack mounting of
a single IP500 V2 control unit, IP500 control unit or IP500 external
expansion module. This includes screws for fixing of the brackets to
the module, bolts for securing the module in the rack and cable tidy
brackets.
· Barrier Box Rack Mounting Kit (SAP 700293905)
Barrier boxes must be used for
extensions. This bracket allows up to 8 IP Office barrier boxes to be
rack mounted and simplifies the number of connections to the
protective ground point in the rack. This kit must be used when more
than 3 barrier boxes are in use and supports a maximum of 16
barrier boxes for a single external expansion module.
out-of-building analog phone
- Issue 1c (09 April 2010)
Page 30