Avaya IP Office Essential Edition Installation Manual page 97

Ip office essential edition partner version installation manual
Table of Contents

Advertisement

Ports
Description
AUDIO
3.5mm Stereo jack socket. Used for external music on hold source input.
AUX
If pressed during a restart of the control unit, the control unit
the System SD card.
If pressed for between 5 and 10 seconds when a system is running, the control unit will shutdown for 10
minutes.
CPU
Indicates the status of the control unit.
· Alternate red/green = Starting up.
· Green on = Okay.
EXPANSION
RJ45 socket. Used for direct connection to external expansion modules using the Expansion Interconnect
cable supplied with the expansion module.
EXT O/P
3.5mm Stereo jack socket. Used for switching external relay systems such as door entry controls. The
port contains two independent switches controlled by the IP Office.
INPUT
AC power input port.
LAN
RJ45 socket. With the WAN port forms a managed layer 3 Ethernet switch. The ports are full-duplex
10/100Mbps auto-sensing, MDI crossover ports.
Optional SD
Used for the Optional SD card. The LED is used in the same way as for the System SD (see below).
RESET
This switch is used to restart the IP Office, optionally erasing the configuration and or the core software in
the process. See
RS232
9-Way D-Type socket. Used for system maintenance.
System SD
Used for the System SD card,. The LED is used as follows.
· Off =
Card
· Green on = Card present.
· Green flashing = Card in use.
· Orange steady = Reset imminent.
RJ45 socket. With the LAN port forms a managed layer 3 Ethernet switch. The ports are full-duplex
WAN
10/100Mbps auto-sensing, MDI crossover ports.
Used for connection of a
and for some locales may be a regulatory requirement.
PARTNER Version Installation Manual
IP Office Essential Edition
Reset
Button.
shutdown.
function or protective
System Component Details: Control Unit
skip booting
· Red on = No software.
· Flashing Red = Error/Shutdown.
· Red flashing = Card initializing or shutting down.
· Red fast flashing = Card full
· Red steady = Card failure/wrong type.
ground. Use of a ground for all systems is recommended
from the /primary folder on
- Issue 1c (09 April 2010)
Page 97

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents