Avaya IP Office Essential Edition Installation Manual page 113

IPO 500 Phone Connections
Ports Description
DC I/P DC power input port. Used for connection of the power lead from an Avaya earthed 60W external power
supply unit supplied with the expansion module. A locale specific IEC60320 C13 power cord for the
external PSU is required but is not supplied with the module.
DTE 9-Way D-Type socket. For Avaya use only.
EXPANSION RJ45 Socket. Used for direct connection to an Expansion port on an IP Office control unit using the
Expansion Interconnect cable supplied with the module.
PHONE RJ45 socket. Used for connection of analog phones. Intended for two-wire analog phones. For
connection to 4-wire analog phones connection should be via a master socket with ringing capacitors.
If connected to an
Barrier Boxes
protective ground.
Protective Ground point. Use of a protective ground is required for all installations, see
(Earthing). Where the module is connected to analog extensions in another building, an IP Office Phone
Barrier Box V2 (101V) is required at both ends, see
All expansion modules are supplied with a base software level and should be upgraded to match the core software of the
control unit in the IP Office system.
Item
IPO 500 Phone
IEC60320 C13 Power Cord
IP500 Rack Mounting Kit
Expansion modules include an external power supply unit (PSU) and an appropriate interconnect cable. They do not
include a locale specific power cord for the external PSU or any phone extension cables.
PARTNER Version Installation Manual
IP Office Essential Edition
out-of-building extension, the connection must be made via additional
in addition to the buildings primary protection. The module must also be connected to a
Variant
16 Ports
30 Ports
CEE7/7
BS1363
NEMA5-15P
System Component Details: Expansion Modules
Lightning Protection/Out-of-Building
Country SAP Code
All 700449507
All 700426224
Europe 700289762
United Kingdom 700289747
America 700289770
All 700429202
IP Office
Grounding
Connections.
Page 113
- Issue 1c (09 April 2010)