Reset Button; Aux Button - Avaya IP Office Essential Edition Installation Manual

5.9 Reset Button

The IP500 and IP500 V2 control units have a Reset button. Pressing the button while the control unit is starting up will
pause the start up until the button is released. The effect of pressing the button during normal operation will depend on
how long the button is pressed and is indicated by the CPU LED.
Press Duration CPU LED
(seconds)
0 to 5. Off
5 to 10. Orange
10 to 30. Flashing orange Erase Configuration/
30 to 40. Red
Over 40. Flashing green

5.10 AUX Button

IP500 V2 control units have an AUX button. This button can be used as follows.
If pressed during a restart of the control unit, the control unit
card.
If pressed for between 5 and 10 seconds when a system is running, the control unit will shutdown for 10 minutes.
PARTNER Version Installation Manual
IP Office Essential Edition
Action
None
Reboot When Free
Immediate Reboot
Erase All.
None
skip booting
Additional Processes: Using the External Output Port
Summary
None.
Reboot when free with new incoming/outgoing call
barring. A reboot using the reset button is recorded in
the Audit Trail.
Erase the configuration, alarm log and audit trail.
Immediate reboot without waiting for active calls to end.
Erase configuration, alarm log and core software.
None.
from the /primary folder on the System SD
Page 75
- Issue 1c (09 April 2010)