Checking The Leds - Avaya IP Office Essential Edition Installation Manual

4.11 Checking the LEDs

Control Unit LEDs
LED Description
Optional SD
· Off =
· Green on = Card present.
· Green flashing = Card in use.
System SD
· Orange steady = Reset imminent.
CPU
· Alternate red/green = Starting up.
· Green on = Okay.
Base Card LEDs
Base Card
All Cards
IP500 Analog Phone
IP500 Digital Station
IP500 Combination
Trunk Daughter Card LEDs
Trunk Daughter Card
All cards
Analog Trunk
PRI Trunk
External Expansion Module LEDs
· Green on = Module okay.
· Red flashing = Module starting up.
PARTNER Version Installation Manual
IP Office Essential Edition
Card shutdown.
LEDs 1 to 8 Usage
· LED1 is used for base card status:
· Red On = Error
· Red Slow Flash = Initializing.
· Red Flash every 5 seconds = Card okay.
· Red Fast Flash = System shutdown.
No status LEDs are used for analog phone extensions.
· Green On - Phone detected.
LEDs 1 to 6
· Green On - Phone detected.
LEDs 9 to 12 Usage
· LED 9 is used for daughter card status.
· Red On = Error
· Red Slow Flash = Initializing.
· Red Flash every 5 seconds = Card okay.
· Red Fast Flash = System shutdown.
· Green on: Card fitted.
· Green flashing: Trunk in use.
· Off: No trunk present.
· Green on: Trunk present.
· Green flashing: Trunk in use.
· Red/Green Fast Flash (port 9) or Green Fast Flash (port 10): Alarm indication signal
(AIS) from the trunk remote end.
· Red with Green Blink (port 9) or Green Blink (port 10): Port in loopback mode (set
through IP Office System Monitor).
· Red flashing = Card initializing or shutting down.
· Red fast flashing = Card full
· Red steady = Card failure/wrong type.
· Red on = No software.
· Flashing Red = Error/Shutdown.
· Red on = Error.
Page 56
- Issue 1c (09 April 2010)