Sd Card Preparation; Upgrade The Card Firmware; Adding A License File - Avaya IP Office Essential Edition Installation Manual

4.4 SD Card Preparation

IP500 V2 control units are supplied with no installed firmware or configuration. When first powered up, the control unit will
load and install the necessary firmware from the System SD card installed in it. It will then create a default configuration
matching the cards installed in the control unit and external expansion module attached to it.
You can perform a number of additional actions prior to installing the System SD card in order to pre configure the IP
Office system.

Upgrade the Card Firmware

·
Add a License File
·
Add a Configuration File
·
Additional actions that can be performed on SD cards are detailed in the
4.4.1 Upgrade the Card Firmware
This process will create the folder structure on the SD card and copy the necessary firmware files from those installed with
Manager onto the SD card. This includes the binary files for the IP Office 500v2 system, any external expansion modules
and phones. It also includes the prompt files for embedded voicemail operation.
This process can be used to upgrade an existing SD card to match the file set installed with Manager. For the card to be
used in an IP Office 500v2 system System SD slot the card must be Avaya SD Feature Key card. The card must be
correctly formatted (see Format IP Office SD card).

4.4.2 Adding a License File

For IP500 V2 control uits, if a licence file called keys.txt is found in the SD card folder which the IP Office uses when it
boots, the IP Office will merge the licenses in that file with its configuration.
The files should be a plain text file (UTF8) containing either:
· A license name and license key separated by a
comma on each line.
· A license key on each line.
1. Using a card reader, copy the file into the /system/primary folder on the System SD memory card.
PARTNER Version Installation Manual
IP Office Essential Edition
1. Note: This process can take up to 20 minutes depending on the PC. Once started
it is recommended that the process is not interrupted.
2. Insert the SD card into a reader slot on the Manager computer.
3. Using Manager, select File | Advanced | Recreate IP Office SD Card.
4. Select IP Office Partner Version. This selection will affect how the IP Office
Essential Edition - PARTNER® Version system operates when defaulted with this
card present in its System SD card slot. .
5. Browse to the card location and click OK.
6. Manager starts creating folders on the SD card and copying the required files
into those folders.
Teleworker, uAuToY@9VvVV@VOzIgeegwLXL2sAs1Z5
Mobile Worker, NvWO_iVY5KJpZMNeY89IB1sIj0_QUCDm
Power User, 9IJQW3yuPsbxjGS2XcMa16_J9H8cSeZ9
System Advanced, JAWZaw@YtK37vcnXkqM4mDYDIdSMd9_1
uAuToY@9VvVV@VOzIgeegwLXL2sAs1Z5
NvWO_iVY5KJpZMNeY89IB1sIj0_QUCDm
9IJQW3yuPsbxjGS2XcMa16_J9H8cSeZ9
JAWZaw@YtK37vcnXkqM4mDYDIdSMd9_1
SD Card Management section.
Installation: Unpacking
Page 43
- Issue 1c (09 April 2010)