Using An Sd Card - Avaya IP Office Essential Edition Installation Manual

5.6.2 Using an SD Card

In addition to using the traditional
required set of firmware files onto the System SD card and rebooting the system.
IP Office Technical Bulletins
·
Ensure that you have obtained and read the IP Office Technical Bulletin relating to the IP Office software release
which you are installing. This bulletin will contain important information that may not have been included in this
manual. IP Office Technical Bulletins are available from the
Upgrade Licenses
·
Some upgrades may require entry of upgrade licenses.
WARNING
·
These processes will cause the IP Office system to be restarted, disconnecting any current calls and services in
progress.
There are a number of ways in which this can be done.
Method
Using Manager
System SD Card
Upgrade
Upgrade from
Optional SD Card
PARTNER Version Installation Manual
IP Office Essential Edition
IP Office Upgrade
Description
Using IP Office Manager, the contents of the card are
compared to the files that Manager has available and
are upgraded if necessary.
In this method, the System SD card is shut down and
removed from the control unit. The card's contents are
upgraded using IP Office Manager.
This method uses an SD card loaded with the required
version of IP Office software. The card is inserted into
the control unit and then Manager, System Status or a
system phone is used to transfer the software to the
System SD card.
Additional Processes: Upgrading the IP Office Software
Wizard, IP500 V2 control units can be upgraded by loading the
Avaya support website (http://support.avaya.com).
Location Software
Files
Local or
Remote
Local
Local
- Issue 1c (09 April 2010)
Embedded
Voicemail
Prompts
–
Page 69