Christie CP2230 User Manual page 154

Appendix B: Serial API
ICP File Management (ICP) (Continued)
FCOP
Not supported.
FREN
Not supported.
EXAMPLES:
(ICP+FSET "ones4K_LE.LUT-SCC") Copies the "ones4K_LE.LUT-SCC" PCT file from the TPC's ftproot directory to the
LUT-SCC directory on the ICP.
(ICP+FSET "Nominal.MCGD") Copy the "Nominal.MCGD" MCGD file from ftproot to the MCGD directory on the ICP.
(ICP+FDEL "Nominal.MCGD") Deletes the "Nominal.MCGD" file from the ICP.
ILS File (ILF)
Set or get the current ILS file for the current or a specific channel.
SUBCODE DESCRIPTION OF USE
C1xx
Set or get the current ILS file for a specific channel.
NONE
Select the ILS file for a current channel.
SAVE
Save the currently active ILS data to a file. Will overwrite an existing file with the same name. Requires
advanced access level.
FDEL
Delete an ILS File
EXAMPLES:
(ILF+C101 "ILS Flat") Set ILS file for channel 1 to file "ILS Flat"
(ILF?L) List all available ILS files
(ILF 1) Set ILS file for current channel to index 1 in file list
(ILF+Save "filename") Save the active ILS values to a file named "filename". If the file doesn't exist, it will be created. If the
file already exits, it will be overwritten.
(ILF+FDEL "LensSetup1") Delete the "LensSetup1" ILS file from the system.
(ILF+FDEL 3) Delete the ILS file at index 3 in the list.
ILS Config (ILS)
Enable/disable the Intelligent Lens System for each channel.
SUBCODE DESCRIPTION OF USE
ACLB
Enable/disable the Auto Lens Mount and Lens reset feature. Once ACLB is turned on, lens mount and lens
system will be reset automatically when system is powered on.
CALB
Calibrate travel range and backlash on specified. Only valid parameter for this command is 5. SET only
command.
CSTS
Motor calibration status (0-100%)
INST
Sets ILS to installed
NONE
Enable/Disable the Intelligent Lens System for each channel. (1/0)
B-8 CP2230 User Manual
020-100430-07 Rev. 1 (05-2014)