6: Cinema Projector Menus; The Touch Panel Controller (Tpc) - Christie CP2230 User Manual

6 Cinema Projector Menus
This section provides information and procedures for using cinema projector menus. You can use cinema
projector menus to adjust cinema projector settings and view status information.
6.1

The Touch Panel Controller (TPC)

The TPC is a touch-sensitive screen that you use to control the cinema projector. You can use the TPC to turn
the cinema projector and lamp on or off, select channels, and view status information. The TPC is mounted on
the rear of the cinema projector. You can tilt and turn the TPC to improve the viewing angle. There are two
USB ports under a cover on the rear of the TPC that you can use to download log files and install software
upgrades. You can disconnect the TPC from the cinema projector and an optional cable allows you to control
the cinema projector from a maximum distance of 100 feet.
If the TPC fails or is disconnected, press the emergency start button that is recessed on the faceplate. This starts
the cinema projector, turns the lamp on, and opens the douser.
CP2230 User Manual
020-100430-07 Rev. 1 (05-2014)
6-1