Cinema Projector Menus
6.16.3
Digital Convergence Window
Use the Digital Convergence window to adjust the red, green, and blue digital micromirror devices (DMD)
electronically. The maximum adjustment you can make is 3 pixels. When you complete a electronic
micromirror adjustment, 1 to 3 pixels are removed from the image.
Do not perform a digital convergence until you manually adjust and set the DMDs. Reset the red, green, and
blue DMD values to their default setting before you manually adjust the DMDs.
Tap Menu > Service Setup > Digital Convergence.
Table 6.34 Digital Convergence Window
Control
Red DMD
Green DMD
Blue DMD
Default
6-52
Description
Adjusts the red digital micromirror device.
Adjusts the green digital micromirror device.
Adjusts the blue digital micromirror device.
Returns all digital micromirror devices to the default setting 0:3.
CP2230 User Manual
020-100430-07 Rev. 1 (05-2014)