Physical Specifications; Regulatory; Safety; Electro-Magnetic Compatibility - Christie CP2230 User Manual

Wait time between lamp strikes:
Warm-up time to full brightness
NOTE: cinema projectors typically force a 10 minute cool down period. Ensure you do not re-strike the lamp
any sooner than 2 minutes into this cool down period since hot re-strikes reduce lamp life.
Other lamps with bulb diameters not exceeding 70mm may also be used, however the cinema projector may
not meet its specified light output rating. Such lamps include the following:
CXL-20
NOTE: CXL-20 lamp requires lamp adaptor kit listed below in Section A.10 Accessories
CXL-30
A.7 Physical Specifications
Overall Size (L x W x H):
(including lens mount, stack and feet)
Weight:
As installed with lens
Shipping (includes packaging)
Operating Position:
Rotation about projection axis
Tilt of projection axis from horizontal
A.8 Regulatory
This product conforms to the following regulations related to product safety, environmental requirements and
electromagnetic compatibility (EMC):
A.8.1 Safety
• CAN/CSA C22.2 No. 60950-1
• UL 60950-1
• IEC 60950-1
A.8.2 Electro-Magnetic Compatibility
Emissions
• FCC CFR47, Part 15, Subpart B, Class A - Unintentional Radiators
• CISPR 22/EN 55022, Class A - Information Technology Equipment
Immunity
CISPR 24 / EN55024 EMC Requirements - Information Technology Equipment
CP2230 User Manual
020-100430-07 Rev. 1 (05-2014)
2 minutes min.
20 minutes max.
(2.0kW Xenolite® bulb)
(3.0kW Xenolite® bulb)
1211 mm (47.7 inches) x 635 mm (25.0 inches) x 483 mm
(19.0 inches)
111 kg (245 lbs)
143 kg (315 lbs)
± 15 degrees maximum
± 15 degrees maximum
Appendix A: Specifications
A-9