Christie CP2230 User Manual page 173

3D DARK TIME (TDK)
Set dark time for 3D control. This controls how much time between displayed images the output remains dark to
allow for the glasses on other gating mechanism to flip between the eyes.
SUBCODE DESCRIPTION OF USE
Cxxx
Replace xxx with the channel number. Valid range is 101 - 164.
NONE
Select dark time for the current channel
EXAMPLES:
(TDK+C101 1) Set dark time to 1 on channel 101
(TDK+C101?) Get dark time on channel 101
Output Reference Delay (phase) (TDP)
Set output reference delay phase for 3D control. This is an additional control for output timing relative to input
timing. The data range is -180 to 180.
SUBCODE DESCRIPTION OF USE
Cxxx
Replace xxx with the channel number. Valid range is 101 - 164.
NONE
Select output reference delay phase for the current channel
EXAMPLES:
(TDP+C101 1) Set output reference delay phase to 1 on channel 101
(TDP+C101?) Get output reference delay phase on channel 101
3D L/R Display Reference (TDR)
Set the L/R display reference for 3D control.
SUBCODE DESCRIPTION OF USE
Cxxx
Replace xxx with the channel number. Valid range is 101 - 164.
NONE
Select L/R display reference for the current channel
EXAMPLES:
(TDR+C101 1) Set L/R display reference to 1 on channel 101
(TDR+C101?) Get L/R display reference on channel 101
Output Reference Delay (time) (TDT)
Set output reference delay time for 3D control. This command controls how much delay between the input and out-
put reference timing.
SUBCODE DESCRIPTION OF USE
Cxxx
Replace xxx with the channel number. Valid range is 101 - 164.
NONE
Select reference delay for the current channel
EXAMPLES:
(TDT+C101 1) Set output reference delay time to 1 on channel 101
(TDT+C101?) Get output reference delay time on channel 101
CP2230 User Manual
020-100430-07 Rev. 1 (05-2014)
Appendix B: Serial API
B-27