Christie CP2230 User Manual page 150

Appendix B: Serial API
Data Logging (DLG) (Continued)
NONE
Set/get the minimum log level to write to the log.
EXLG
Extract entries from log files. Requires 3 parameters: "startdate", "enddate", "logtype". The data parame-
ters require the date in the format "yyyymmdd". The logtype parameter can have the following values:
"ENG" (engineering),
"SEC" (security),
"OPR" (operational),
"MAI" (maintenance),
"EVE" (event),
"SYS" (system),
"ALL".
EXAMPLES:
(DLG "20091108" "20091110" "ALL")
(DLG+EXLG!"Log data extracted to filename 'logextract.txt' on FTP root")
(DLG 2) Set current logging level to 2
(DLG?) Get current logging level. Response is (LDG!00002 "Info")
Data Format (DTF)
Select data packing format for selected input. Available data formats depends on current input port (as selected by SIN).
SUBCODE DESCRIPTION OF USE
Cxxx
Replace xxx with the channel number. Valid range is 101 - 164.
NONE
Select data format for current channel
EXAMPLES:
(DTF?) Get current data format
(DTF?L) Show entries on the list
(DTF 1) Set current data format to 1 (292: 422 Packed 12Bit)
(DTF+C108?) Get data format on channel 108
(DTF+C108 20) Use data format 20 (DVI: Unpacked 8Bit) on channel 108
Electronic Digital Convergence (EDC)
Set or query ICP electronic digital convergence values. Use EDC to shift the red, green, and blue pixel data by up
to three pixels.
There are six EDC values (pixel shift amounts): red horizontal, green horizontal, blue horizontal, red vertical,
green vertical, and blue vertical. The valid range for each EDC value is from zero to three, inclusive. The default
EDC values are: 0, 0, 0, 3, 3, 3.
SUBCODE DESCRIPTION OF USE
NONE
Set or query all six EDC values.
REDH
Set or query the red horizontal EDC value.
GRNH
Set or query the green horizontal EDC value.
BLUH
Set or query the blue horizontal EDC value.
REDV
Set or query the red vertical EDC value.
GRNV
Set or query the green vertical EDC value.
B-4 CP2230 User Manual
020-100430-07 Rev. 1 (05-2014)