Christie CP2230 User Manual page 155

ILS Config (ILS) (Continued)
RSET
Move motor to center flag and then move back to current position. Only valid parameter for this command
is 5. SET only command.
RSTS
Motor reset status (0-100%)
EXAMPLES:
(ILS 1) Enable ILS, lens will be moved to the position in each channel
(ILS 0) Disable ILS, position data in each channel will not be used. Moving lens will not affect any channel setting
(ILS+CALB 5) Calibrate all axes of the lens. Set only command
(ILS+RSET 5) Reset all axes of the lens
(ILS+ACLB 1) Reset lens automatically when power on
Set IMB Device Type (IMI)
Used to set the IMB device type.
SUBCODE DESCRIPTION OF USE
DEVT
Set device type from the list of devices.
EXAMPLES:
(IMI 1) Set to IMB installed.
(IMI+DEVT?L) List valid device types.
(IMI+DEVT?) Query current device type.
Start Interrogator, check interrogator status (INT)
SUBCODE DESCRIPTION OF USE
BASC
Start a basic interrogation (set only)
ENHA
Start an enhanced interrogation (set only)
STAT
Responds with 2 values: currently running (1 if running) and result file.
EXAMPLES:
(INST+BASC 1) Run a basic interrogation (set only)
(INT+STAT?) Query interrogator status. Returns (INT+STAT!00100 00000 "Interrogator_Enhanced_20101103194849.7z"),
which means the interrogator is 100% finished, not currently running and the latest interrogator file that was generated is named
"Interrogator_Enhanced_201001103194849.7z" and can be found on the cinema projector's FTP server.
Internal Test Pattern (ITP)
List and select internal test patterns. This command also creates the customized test pattern list from the internal
test patterns. The list of available test patterns is determined by what files are loaded on the TI cinema electronics.
SUBCODE DESCRIPTION OF USE
FULL
Set(1)/Reset(0) full screen size
KEEP
When KEEP=1, don't disable test pattern when changing channels
NOCR
NOCR set non-correction test patterns for measured color. Valid range is 0 to 6
NONE
Select test pattern from full list of defined test patterns
CP2230 User Manual
020-100430-07 Rev. 1 (05-2014)
Appendix B: Serial API
B-9