Overriding Scheduling; Figure 4-3 Frame Rate Gauge Changes During Event Recording And Retrieval - Honeywell Rapid Eye Operator's Manual

Event Recording for Video

Overriding Scheduling

This gauge indicates that
video is being recorded in a
Live session.
Clicking turns the color
of the second row to yellow,
indicating that recording has
been boosted.
60
3. Select another camera window.
4. Click . The timer is reset to five minutes an starts counting down for both cameras.
5. Repeat steps 3 and 4 for as many cameras as needed. The timer counts down for all
boosted cameras.
Use of the Boost button overrides the scheduling for recorded video. Even if cameras are
scheduled not to record, video is recorded at event recording settings.
Figure 4-3 Frame Rate Gauge Changes during Event Recording and Retrieval
Live Session
Recording Indicator Color
The recording of a video feed is shown by the lower-left corner of the resolution gauge.
Recording is ON if the corner is filled with a red square (see the gauge in
Note See Video Recorded Using Boosted Settings
page 139 for more information.
Retrieval Session
During retrieval, the
gauge's color remains
unchanged and only
the recorded resolution
is reported (indicating a
change when recording
was boosted).
on page 57, and
Figure 4-3).
Scheduling on