Connection Report; Figure 3-17 Site Tab Primary Connections Report; Table 3-4 Automatic Connection Names For A Rapid Eye Site - Honeywell Rapid Eye System Administration Manual

Connecting to a Rapid Eye Unit

Connection Report

56
Preparation
Use Admin to define the sites as network units (see
can then use a modem to connect to these sites using the Microsoft dial-up application to
connect to the RAS server.
Using an Outside Line Requires a Prefix Number
A prefix is an extra telephone keystroke such as a 9 or an 8 that you should set in the
Windows Telephony program running on the PC.
What Your Network Administrator Needs
Multi-Media sessions (live, retrieval and alarm) are sent to port 10,000. This port should be
left open in your organization's firewall for the sockets used by Multi-Media units.
Figure 3-17 Site Tab Primary Connections Report
In the Admin application, the site tab reports the primary connection to a Rapid Eye
Multi-Media site (see
Figure
Connection Codes
The codes used to identify the primary connection are listed in
Table 3-4 Automatic Connection Names For a Rapid Eye Site
Site Tab Report
(n) IP address
(d) telephone number
(p) telephone number (n) IP address [site name] -> PPP
Setting Up a
3-17).
Automatic Name
[site name] -> Network
[site name] -> Dial-up
Connection, page 42). You
Report of unit's
primary
connection
Table 3-4.
Connection
network
dial-up
dial-up to RAS