Physical Removal Of A Site; Other Site-Related Functions; Grouping Sites In A Folder - Honeywell Rapid Eye System Administration Manual

Adding a Site to the Multi-Media Database

Physical Removal of a Site

Other Site-Related Functions

Grouping Sites in a Folder

38
2. Right-click a site name. A menu appears.
3. Click Delete.
4. Confirm the deletion.
Note An operator who deletes a site by mistake needs to re-enter that site's
information (see
applied to a Rapid Eye Multi-Media unit and that site is deleted by mistake,
you need LVP (see
To physically disconnect a Rapid Eye unit from its means of communications, refer to the
Rapid Eye™ Multi-Media Digital Video Recorder Installation
Cameras displays an empty list when adding a site after running a
using View software, Cameras lists the names of the cameras connected to the unit.
LVP. The last valid password utility is used only for replacement units, or for sites that are
mistakenly deleted while a system password is in use.
Caution Do not click LVP. Uninformed use of the LVP utility can make a unit
unusable. See
Change toggles user management. See
To set up a connection, see
To designate alarm stations, see
Grouping sites is optional. Use folders to group sites in an Admin database.
on page 35). If a system password has been
Adding a Site
Last Valid Password
on page 190.
Last Valid Password
User Management
Connecting to a Rapid Eye Unit
Addressing Alarms to an Alarm Station
on page 190).
Guide.
Maintenance
on page 167.
on page 41.
on page 57.
Session,