Configuring System Settings; Configuring General Settings; General Settings - Honeywell HRHT4041 Remote User Manual

Configuring System Settings

Configuring General Settings

General Settings

Figure 3-48 General Settings Interface
Table 3-21 General Settings Configurations
Configuration
Device Name
Device No.
Language
Video Standard
HDD Full
Pack Mode
Auto Logout
Description
Enter a device name.
Enter a channel number.
Select a GUI language from the drop-down list.
Note You need to reboot the device/DVR to activate this
change.
Select the video standard, either NTSC or PAL.
Select what happens when the DVR's storage is full. Select
either Stop Recording or OverWrite.
Stop Recording: If the HDD is full, the DVR stops recording.
OverWrite: If the currently working HDD is full and the next
HDD is also full, the DVR overwrites the previous files.
Select the recording duration. Select from 1 to 60 minutes.
The default is 60 minutes.
Configure how long before the DVR automatically logs out.
Enter a value between 1 to 60 minutes. The default is 60
minutes.
Configuration | 85
800-22740 - A - 02-2017