Updating The System Firmware; Figure 12-10 Import/Export Configuration Menu - Honeywell HRG4 User Manual

To import or export HRG DVR configuration:
1.
2.
3.
4.
5.

Updating the System Firmware

The firmware on your HRG DVR can be updated using two methods: you can update via a USB
device or over the network via an FTP server.
To update via a USB device:
1.
2.

Click Menu Maintenance
menu (see Figure 12-10).

Figure 12-10 Import/Export Configuration Menu

Click Export to export a configuration file to USB device. USB device must be connected
at this point to the HRG DVR.
To import a configuration file, select the file from the USB device, and then click Import.
After the import process is completed, the system will automatically reboot the HRG DVR.
Click Cancel to exit the current menu.
Connect the USB device to the HRG DVR. The firmware file must be located in the root
directory of your USB device.

Click Menu Maintenance
Figure 12-11).

Configuration to enter the Import/Export Configuration

Upgrade to enter the Firmware Update menu (see
HRG DVR Management | 115
800-12005V1 - A - 08/2012