Table of Contents
Advertisement
Calendar Setup
Applies to
Alternate mode
only.
Enable/Disable Events for Normal/Alternate Mode
Rev 2.00
Figure 8-7
Alternate Setup Screen, Pre-Event
Select the Alternate button in the Event Setup portion of the screen, then press Enter. The
Event Mask Setup screen displays (see
Figure 8-8
Event Mask Setup Screen, Alternate Recording
The Event Mask Setup screen displays selection boxes for each type of event recording:
Alarm, Text, and Motion. When a selection box is checked, the event recording for that type
of trigger is enabled.
Example
When all four of the selection boxes in the Motion field are checked, as in
four motion detection inputs are enabled during the alternate recording periods.
To save the event masks for the alternate recording periods, select Accept, then
press Enter. You are returned to the Alternate Setup screen.
To set the Event mask screen for Normal recording periods, select the Normal button in the
Event Setup portion of the screen, then press Enter. The HRDVS displays the Event Mask
Setup screen for the normal recording periods.
Figure
8-8).
48
Figure
8-8,
Document 900.0281
02/07
Advertisement
Table of Contents
