Keyboard Interface
Wedge Quiet Interval
This option specifies the amount of time to look for keyboard activity before the reader
breaks the keyboard connection in order to transmit data to host. The selectable range for
this feature is from 0 to 990ms in 10ms increments. See
page 257
$CKBQI
Select Wedge Quiet Interval Setting
Make a mistake? Scan the CANCEL bar code to abort and not
save the entry string. You can then start again at the beginning.
60
for more detailed programming instructions.
This feature applies ONLY to the Keyboard Wedge interface.
NOTE
10 = Quiet Interval of 100 ms
DEFAULT
ENTER/EXIT PROGRAMMING MODE
Wedge Quiet Interval on
~
CANCEL
QuickScan
Lite QW2100
TM