Please Keep In Mind; Global Prefix/Suffix - Datalogic QuickScan Lite QW2100 Product Reference Manual

Data Editing

Please Keep In Mind...

•
•
•
•

Global Prefix/Suffix

Up to 20 ASCII characters may be added as a prefix (in a position before the bar code data) and/
or as a suffix (in a position following the bar code data) as indicated in . See
fix on page 260
$CLFSU
Set Global Suffix
Make a mistake? Scan the CANCEL bar code to abort and not
save the entry string. You can then start again at the beginning.
68
Modifying a message string is not a mandatory requirement. Data editing is sophisticated
feature allowing highly customizable output for advanced users. Factory default settings
for data editing is typically set to NONE.
A prefix or suffix may be applied (reference the
across all symbologies (set via the Global features in this chapter).
You can add any character from the
of this manual as a prefix, suffix or Label ID.
Enter prefixes and suffixes in the order in which you want them to appear on the output.
for more detailed programming instructions.
DEFAULT
Symbologies
ASCII Chart (from 00-FF) on the inside back cover
Set Global Prefix
No Global Prefix
Global Suffix = 0x0D (CR)
ENTER/EXIT PROGRAMMING MODE
chapter for these settings)
Global Prefix/Suf-
$CLFPR
~
CANCEL
QuickScan Lite QW2100
TM