Introduction
ming bar codes necessary for configuring these features.
Chapter 11, References
Appendix A, Technical Specifications
well as environmental and regulatory specifications. It also provides standard cable pin-
outs.
Appendix B, Standard Defaults
features and options.
Appendix C, LED and Beeper Indications
functions and behaviors of the reader's LED and Beeper indicators.
Appendix D, Sample Bar Codes
gies.
Appendix E, Keypad
tings.
Appendix F, Scancode Tables
and USB Keyboard interfaces.
Manual Conventions
The following conventions are used in this document:
The symbols listed below are used in this manual to notify the reader of key issues or
procedures that must be observed when using the reader:
References
Current versions of the Product Reference Guide (PRG), Quick Reference Guide
(QRG), the Datalogic Aladdin™ Configuration application, software/firmware and any
additional manuals, instruction sheets and utilities for this product can be downloaded
from the website listed on the back cover of this manual. Alternatively, printed copies or
product support CDs can be purchased through your Datalogic reseller.
2
provides details concerning programmable features.
includes numeric bar codes to be scanned for certain parameter set-
lists control character emulation information for Wedge
Notes contain information necessary for properly diagnosing, repair-
ing and operating the reader.
NOTE
The CAUTION symbol advises you of actions that could damage
equipment or property.
CAUTION
lists physical and performance characteristics, as
references common factory default settings for reader
supplies tables containing descriptions of the
offers sample bar codes of several common symbolo-
QuickScan
Lite QW2100
TM