Data Editing
Character Conversion
Character conversion is an eight byte configuration item. The eight bytes are 4 character pairs
represented in hexadecimal ASCII values. The first character in the pair is the character that will
be converted. The second character in the pair is the character to convert to. If the character to
convert in a pair is FF, then no conversion is done. See
for more detailed programming instructions.
82
0xFFFFFFFFFFFFFFFF
DEFAULT
(No character conversion)
ENTER/EXIT PROGRAMMING MODE
Character Conversion on page 266
$CLFCH
Configure Character Conversion
QuickScan
Lite QW2100
TM