Code 11 Set Length 2 - Datalogic QuickScan Lite QW2100 Product Reference Manual

Symbologies
Code 11 — cont.

Code 11 Set Length 2

This feature specifies one of the bar code lengths for
maximum label length if in
Length
The length can be set from 2 to 50 characters. A setting of 00 specifies to ignore this length
(only one fixed length). See
instructions.
$CC1L2
Select Code 11 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and not
save the entry string. You can then start again at the beginning.
192
Variable Length
Mode. Length includes the bar code's check and data characters.
Set Length 2 on page 269
50 = Length 2 is 50 Characters
DEFAULT
ENTER/EXIT PROGRAMMING MODE
Code 11 Length Control. Length 2 is the
Mode, or the second fixed length if in
for more detailed programming
~
CANCEL
QuickScan
Fixed
TM
Lite QW2100