Codablock F Aim Check; Codablock F Length Control - Datalogic QuickScan Lite QW2100 Product Reference Manual

Symbologies

Codablock F AIM Check

Specifies if Check Digit calculation algorithm is AIM compliant or not.
$CCFAC01
Codablock F AIM Check = AIM compliant

Codablock F Length Control

This feature specifies either variable length decoding or fixed length decoding for the Codablock
F symbology.
Variable Length—
set.
Fixed Length—
DEFAULT
$CCFLC01
Codablock F = Fixed Length
228

For variable length decoding, a minimum and maximum length may be
For fixed length decoding, two different lengths may be set.

ENTER/EXIT PROGRAMMING MODE
$CCFAC00

Codablock F AIM Check = Not AIM compliant
DEFAULT
$CCFLC00

Codablock F Length Control = Variable Length
QuickScan
TM
Lite QW2100