ENTER/EXIT PROGRAMMING MODE
Stand Mode Triggered Timeout
This feature specifies the time to remain in
Stand
$CSNOT01
Stand Mode Triggered Timeout = 0.5 Seconds
$CSNOT04
Stand Mode Triggered Timeout = 2 Seconds
$CSNOT08
Stand Mode Triggered Timeout = 4 Seconds
Product Reference Guide
Mode.
This timeout is only used when the Scan Mode is configured as
NOTE
Trigger Single
mode after the trigger is pulled while in
DEFAULT
$CSNOT03
Stand Mode Triggered Timeout = 1.5 Seconds
$CSNOT06
Stand Mode Triggered Timeout = 3 Seconds
Scanning Features
.
Stand Mode
31