Appendix F Scancode Tables; Control Character Emulation - Datalogic QuickScan Lite QW2100 Product Reference Manual

Control Character Emulation

Control character emulation selects from different scancode tables as listed in this appendix.
Each of the control character sets below are detailed by interface type in the tables. These apply
to Wedge and USB Keyboard platforms.
Control Character 00 —
special keys are located from 0x80 to 0xA1.
Control Character 01 —
ital Key, special keys are located from 0x80 to 0xA1.
Control Character 02 —
to 0xFE are intended as an extended ASCII table (Microsoft Windows Codepage 1252 —
page
Product Reference Guide
Characters from 00 to 0x1F are sent as control character Ctrl+Keys,
Characters from 00 to 0x1F are sent as control character Ctrl+Cap-
Special keys are located from 00 to 0x1F and characters from 0x80
308).
Appendix F
Scancode Tables
see
301