Data Editing
Label ID
A Label ID is a customizable code of up to three ASCII characters (each can be one of hex
0x01-0xFF), used to identify a bar code (symbology) type. It can be appended previous to or fol-
lowing the transmitted bar code data depending upon how this option is enabled. This feature
provides options for configuring custom Label IDs as a pre-loaded set (see
loaded Sets on page
Per Symbology on page
try standard label identifier for ALL symbology types, see the previous feature
on page
Label ID: Pre-loaded Sets
The reader supports two pre-loaded sets of Label IDs. shows the USA set and the EU set. See
Label ID: Pre-loaded Sets on page 262
sets that are provided.
DEFAULT
Label ID Pre-loaded Set = EU Set
70
70) or individually per symbology (see
71). If you wish to program the reader to always include an indus-
69.
When changing from one Label ID set to another, all other reader configura-
tion settings, including the host interface type, will be erased and set to the
factory defaults. Any custom configuration or custom defaults will be lost.
CAUTION
$Ae
ENTER/EXIT PROGRAMMING MODE
Label ID: Set Individually
for more information concerning the pre-loaded
$AE
Label ID Pre-loaded Set = USA Set
QuickScan
Label ID: Pre-
Global AIM ID
Lite QW2100
TM