Ack Nak Retry Count - Datalogic QuickScan Lite QW2100 Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

ACK NAK Retry Count

This feature specifies the number of times the reader retries a label transmission due to a retry
condition. The selectable range is from 1 to 254 retries. A selection of 0 disables the count, and
a selection of 255 specifies unlimited retries. See
more detailed programming instructions.
$CR2AR
Select ACK NAK Retry Count Setting
Make a mistake? Scan the CANCEL bar code to abort and not
save the entry string. You can then start again at the beginning.
Product Reference Guide
003 = 3 Retries
DEFAULT
ACK NAK Retry Count on page 254
~
CANCEL
ACK NAK Options
for
49