Introduction
Use the programming bar codes in this chapter if modifications to the standard RS-232 inter-
face settings are necessary to meet your system's requirements. Additional settings which apply
to both the RS-232 and USB interfaces are available in
faces.
RS-232 Standard Factory Settings
Reference
Baud Rate
Baud rate is the number of bits of data transmitted per second. Set the reader's baud rate to
match the baud rate setting of the host device. With an improper baud rate setting, data may
not reach the host correctly.
$CR2BA01
Baud Rate = 2400
Product Reference Guide
RS-232 ONLY Interface
Appendix B, Standard Defaults
ENTER/EXIT PROGRAMMING MODE
Chapter 6, RS-232/USB-Com Inter-
for a listing of standard factory settings.
$CR2BA00
Baud Rate = 1200
$CR2BA02
Baud Rate = 4800
Chapter 5
37