Keyboard Send Control Characters - Datalogic QuickScan Lite QW2100 Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

Keyboard Send Control Characters

This feature is used by the Keyboard Wedge and USB Keyboard interfaces. It specifies how the
reader transmits ASCII control characters to the host. Reference
Tables
Options are as follows:
Send Ctrl+Key —
mat Ctrl+Key. Special keys are available in the range from 81H to A1.
Send Ctrl+Shift+Key —
format Ctrl+Shift+Keys.
Send Special Function Key —
cial function key mapping table (see
This is used to send keys that are not in the normal ASCII set. A unique set is provided for each
available scancode set.
DEFAULT
$CKBSC01
Keyboard Send Control Characters = 01
Product Reference Guide
for more information about control characters.
ASCII characters from 00H to 0x1FH inclusive are transmitted in the for-
The behavior is the same as above, but control keys are sent in the

Send characters between 00H and 1FH according to the spe-
Microsoft Windows Codepage 1252 on page
Keyboard Send Control Characters = 00
Keyboard Send Control Characters = 02
Keyboard Send Control Characters
Appendix F, Scancode
$CKBSC00

$CKBSC02

310).
59