Ip Over Atm - NetComm RTA1320 User Manual

ADSL Router User Manual
You can check it at this time. If you find
something is incorrect, click Back to change
the settings.
If everything is OK, click Finish to accept
these settings.
Now, the system will reboot to activate the
new settings that you have done in this
section.
Please wait for 2 minutes for restarting the
router.

IP over ATM

If the type you choose is IP over ATM, please refer to the following information.
IPoA is an alternative of LAN emulation. It allows TCP/IP
network to access ATM network and uses ATM quality of
service's features.
Choose IPoA and click Next
None:
If it is not necessary to set the WAN IP address, please click this
button.
Obtain an IP address automatically: Click this button to make
the system get an IP address automatically.
WAN IP Address:
Type in the IP address that you got from ISP for the WAN
interface.
WAN Subnet Mask:
Type in the subnet mask address that you got from ISP for the
WAN interface.
Obtain DNS server address automatically:
Click this button to make the system get DNS server
automatically.
Use the following DNS server address:
If you want to set DNS server by yourself, you have to click on
this button to invoke the following entries.
Primary DNS server:
Type in your preferred DNS server that you got from ISP.
Secondary DNS server:
Type in the alternate DNS server that you got from ISP.
26