Install The Server (23-Inch Hardmount Kit) - Oracle Netra Server X3-2 Installation Manual

TABLE:
Quantity
9
12
12
Related Information
"Install the Server (23-Inch Hardmount Kit)" on page 70
■
"Tools Needed for Installation" on page 22
■
"Handling Precautions" on page 20
■
"Rack Cautions" on page 23
■

▼ Install the Server (23-Inch Hardmount Kit)

Note – The 23-inch, 2-post rackmount kit supports rack web thicknesses (the width
of the rack post) of 3 in. (76.20 mm), 4 in. (101.6 mm), and 5 in. (127 mm).
1. Gather the required tools.
See
2. Read the server cautions.
See
3. Read the rack cautions and stabilize the rack.
See
4. Using eight of the M5 x 7 SEM screws (four for each side bracket), secure the
side brackets to the sides of the server.
70 Netra Server X3-2 Installation Guide • May 2013
23-Inch Rackmount Screws (Continued)
Description
M6 square clip nuts
10-32 x 0.5 in. combo head screws
12-24 x 0.5 in. combo head screws
"Tools Needed for Installation" on page
"Handling Precautions" on page 20
"Rack Cautions" on page 23
Where Used
9 for rack, if appropriate
12 for rack, if appropriate
12 for rack, if appropriate
22.
and "ESD Precautions" on page
and "Stabilize the Rack" on page
21.
24.