Table of Contents
Advertisement
SER MGT Port
The SER MGT RJ-45 port, located on the rear panel, provides an TIA/EIA-232 serial
Oracle/Cisco standard connection to the SP. For DTE-to-DTE communications, you
can use the supplied RJ-45 to DB-9 crossover adapter with a standard RJ-45 cable to
achieve the required null modem configuration.
By default, this port is configured with these parameters:
8N1: eight data bits, no parity, one stop bit
■
9600 baud
■
Disable hardware flow control (CTS/RTS)
■
Disable software flow control (XON/XOFF)
■
Pin
Signal Description
1
Clear to Send
2
Data Carrier Detect
3
Transmit Data
4
Ground
Caution – Do not attach a modem to this port.
Related Information
"Available Connections" on page 78
■
"Rear Panel Components (Installation)" on page 7
■
"NET MGT Port" on page 84
■
"Gigabit Ethernet Ports" on page 84
■
"USB Ports" on page 86
■
"Video Port" on page 86
■
"Alarm Port" on page 88
■
Pin
Signal Description
5
Ground
6
Receive Data
7
Data Terminal Ready
8
Ready to Send
Connecting Cables
83
Advertisement
Table of Contents
