How Characters And Numerals Are Displayed; Changing A Value In Large Steps; Saving Your Settings - Roland Groovebox D2 Owner's Manual

How characters and
numerals are displayed
The display of the D2 indicates characters and numbers as
follows.
A B C D E F G H I J K L M N
Capital
letters
Small
letters
O P Q R S T U V W X Y Z
Capital
letters
Small
letters
1 2 3 4 5 6 7 8 9 0

Changing a value in large steps

If you hold down [DISPLAY] and turn [VALUE], the value
will change in large steps.
If you do this when selecting a patch (p. 18), the first patch of
the category (type of sound) will be selected.
Hold down
When selecting a pattern (p. 15) or patch (p. 18), you can hold
down [EXIT] and turn [VALUE] to switch banks.
Hold down Turn
Turn
Chapter 1. An Overview of the D2

Saving your settings

After you modify settings or record a performance, you must
perform the Save procedure if you wish to keep the results. If
you turn off the power without doing this, your settings or
the recorded contents will be lost.
For details on saving, refer to the following pages.
• Patch Saving a patch (p. 18)
• Pattern Saving a pattern (p. 20)
• Song Saving a song (p. 72)
• Arpeggio style Step 4 of "Making detailed settings" in
Playing arpeggios (ASSIGN 1: ARPEGGIATOR 1) (p.
26)
It will take several seconds for the data to be saved. Do not
turn off the power until the Save operation has been
completed. Doing so may cause malfunctions.
Since the following settings are saved
automatically when they are modified, you do
not need to perform the Save operation.
• RPS set Assigning phrases to the D-FIELD (p. 23)
• Pattern set Assigning patterns to the D-FIELD (p.
30)
• MEGAMIX set Registering the parts for use with
MEGAMIX (MEGAMIX Set) (p. 30)
It will take several seconds for the data to be saved. Do not
turn off the power until the Save operation has been
completed. Doing so may cause malfunctions.
13