Entering Text; Changing Channel Names And Channel Colors - Roland M-5000 Reference Manual

Entering Text

When entering text, a screen keyboard like the one shown below is
displayed.
0-9, A-Z, `-=[]\;' , ./ These input text.
NEXT This jumps to text input for the next channel.
When this is on, letters of the alphabet are input
CAPS
in upper case.
When this is on, letters of the alphabet are input
in upper case. This is turned off after a single
character is input.
SHIFT
Also, when this is on, you can select multiple
characters by tapping <1> or <0>.
COPY This copies multiple selected characters.
CUT
This cuts multiple selected characters.
PASTE This pastes multiple selected characters.
Backspace
BS
This deletes the character just before the cursor.
ENTER, OK These apply the text input and exit the popover.
1/0
These move the cursor left/right.
Cancel
CANCEL
This discards any text input and exits the
popover.

Changing Channel Names and Channel Colors

When entering the name of an input channel or output bus, an area
for changing the channel color is displayed in addition to the screen
keyboard.
Select from among nine channel colors.
5 RED
5 ORANGE
5 YELLOW
5 LIME
5 GREEN
5 BLUE
5 NAVY
5 VIOLET
5 BLACK
Touch Display Operations
69