Fader Bank Section - Roland M-5000 Quick Start Manual

Fader Bank Section

This section is for working with eight input channels or output buses or both. You use layer selection and scrolling to access the desired input channel
or output bus.
Fader Bank display
[SEL] button
[SOLO] button
Level meter
[MUTE] button
Fader
Name
Fader bank display
[SEL] button
[SOLO] button
Level meter
[MUTE] button
Fader
[FUNC] button
[SCROLL K] /
[SCROLL J] button
(JUMP)
[SENDS ON FADER] button
[ISOLATE] button
Layer buttons
Description
This displays information such as the input channel/output bus name and fader value. In the Function mode, it displays
information such as a list of functions and parameter values.
This selects the input channel/output bus and selects the display target. In the Function mode, it selects the function
and manipulates parameters.
This turns solo on and off for the input channel/output bus.
This displays the signal level of the input channel/output bus.
This turns muting on and off for the input channel/output bus.
This operates the fader for the input channel/output bus.
This turns the function mode on and off. It flashes when the function mode is on.
This scrolls the channel left and right.
Pressing [SCROLL <] and [SCROLL >] at the same time displays the anchor channel where the currently selected Layer in
the fader display is registered (anchor jump).
This turns SENDS ON FADER on and off. It flashes when on.
0"Using Faders to Adjust the Send Level to AUX (SENDS ON FADER)" (p. 51)
This turns isolate of Fader Bank on and off.
0"Isolated Banks" (p. 46)
This selects the layer for the Fader Bank section. The button for the selected layer lights up.
Part Names and Functions
[FUNC] button
[SCROLL K] /
[SCROLL J] button
[SENDS ON FADER] button
[ISOLATE] button
Layer buttons
29